If you’re an avid hunter, chances are you’ve considered mounting one of your deer heads as a trophy. While this may seem like a daunting task, it’s actually not that difficult to do a European deer mount. With a little bit of time and patience, you can create a beautiful display for your home or hunting lodge.
Here’s how to do it: Start by finding a reputable taxidermist in your area. They will have the experience and knowledge necessary to properly prepare your deer head for mounting.
Once you’ve found someone, schedule an appointment and take the deer head to them as soon as possible after harvesting it. The taxidermist will skin the head and remove all the meat and organs. They will then preserve the hide so it doesn’t rot or deteriorate.
Next, they will put wires into the skull to help support it during the mounting process. After that, they’ll start building up the neck muscles with padding before finally attaching the hide to the wire frame. Once everything is in place, they’ll add clay or plaster around the base of the neck to give it a natural appearance.
The last step is painting or staining the mount to match your desired look. And that’s it!
- European deer mounts are a type of taxidermy that can be used to display game animals in your home or office
- The first step is to skin the deer and remove the head
- Next, you will need to fleshen the hide, which is done by removing any excess fat and tissue from the inside of the skin
- Once the hide is fleshed, it will need to be turned inside out and tanned
- This process preserves the hide so it does not rot or degrade over time
- After the hide is tanned, it can be stretched over a form that has been shaped to look like a deer’s body
- The final step is to mount the antlers onto the form, and then your European deer mount is complete!
How To Do A European Mount (The Easy Way)
What is the Easiest Way to Do a European Mount?
There are a few different ways that you can go about doing a European mount, but we’re going to give you the easiest way to do it. First things first, you’re going to need to get your hands on a skull. You can either find one yourself or purchase one from a taxidermist.
Once you have your skull, the next step is to boil it. This will help to loosen up all of the flesh and tissue so that it will be easier to remove later on. Boil your skull for around 3-4 hours and then let it cool down before handling it.
Once your skull has cooled down, use a wire brush or some other type of tool to scrape off any remaining flesh or tissue. You want to make sure that the bone is completely clean before moving on to the next step. Now it’s time to bleach the skull.
This will help to whiten it and kill any bacteria that may be present. There are many different bleaching products on the market, but we recommend using hydrogen peroxide as it’s relatively inexpensive and easy to find. Simply submerge your skull in a bucket of hydrogen peroxide and let it sit for 24 hours.
After 24 hours have passed, rinse off your skull with water and let it air dry completely. Once dry, you can now apply a coat of polyurethane or paint if desired (this step is optional). And that’s it!
You now have yourself a beautiful European mount that you can proudly display in your home or office!
What is the Best Way to Do a European Deer Mount?
If you’re looking to do a European deer mount, there are a few things you’ll need to take into account. First, you’ll need to decide what kind of mount you want- either shoulder, half-body, or full-body. Shoulder mounts are the most common, and generally the easiest to do.
Half-body mounts require a bit more work, but can be done with some patience and careful planning. Full body mounts are the most challenging, but also offer the most realistic results. Once you’ve decided on the type of mount you want, it’s time to start collecting your supplies.
You’ll need a sharp knife for skinning, as well as a saw for cutting through bone. A good set of small hand tools will also come in handy (pliers, screwdrivers, etc.). You’ll also need some formaldehyde-free tanning solution – this is important because formaldehyde is highly toxic and can cause serious health problems if inhaled or ingested.
The next step is to skin your deer carcass. This can be tricky, so it’s important to take your time and be very careful not to cut yourself. Once the skin is removed, you’ll need to remove all the meat from the carcass – this includes any fat or connective tissue.
The skeleton should then be thoroughly cleaned before being soaked in the tanning solution overnight (or for at least 12 hours). After soaking, the skeleton should be rinsed off and allowed to air dry completely. Once dry, it’s time to start reassembling your deer mount!
Shoulder mounts can be done by simply attaching the skullcap and antlers (if desired) directly to the wall using screws or nails. For half-body or full-body mounts, however, you’ll need to construct a frame out of wood or PVC pipe first. This frame will provide support for the weight of the finished mount and help keep everything in place during transport/hanging.
Once your frame is complete, it’s time to start attaching pieces of fur/hide back onto the skeleton using strong thread or wire . Start with larger pieces first and work your way down to smaller ones – this will give your mount a more natural look when finished . It’s importantto sew each piece securely in place , taking care not too pull too tightly (which could cause distortion).
Do It Yourself European Mount?
A European mount is a traditional way of displaying the skull of a game animal. The skin and flesh are removed, leaving only the bare bones. This method can be done at home with some patience and the right tools.
The first step is to remove all the meat and tissue from the skull. This can be done by boiling or using a degreaser. Once the skull is clean, it needs to be bleached to whiten the bones.
A simple solution of hydrogen peroxide and water will do the trick. After bleaching, the skull can be painted or left natural. It’s up to you!
You can also add some flair by attaching antlers or other decorations. DIY European mounts make great conversation starters and look impressive on any wall.
What is the Average Cost of a European Mount for Deer?
According to the Quality Deer Management Association, the average cost of a European mount for deer is about $100. This includes the cost of the materials and labor necessary to prepare the mount. The actual cost will vary depending on the size and condition of the deer skull, as well as any additional features or customization that you request.
For example, adding antlers to a European mount can increase the cost by $50 or more.
If you’re an avid hunter, you may want to display your trophy by doing a European deer mount. Here’s how:
First, you need to skin the deer and remove all of the meat from the bones.
Next, you’ll need to cut off the head and neck just below where they meet the body. Once that’s done, you’ll need to saw off the antlers at their base. Now it’s time to start putting everything back together.
First, reattach the head and neck using strong wire or screws. Next, position the hide over the skeleton and secure it with wire or staples. Finally, add some embellishments like fake eyes and teeth to really make your mount stand out.